Connect a POS register
On this page
A register is a till in one of your outlets, such as Front counter or Bar 2. To take sales on a computer or tablet, you connect the device to a register, and the shifts, orders, and payments taken on that device are then recorded against that register.
Use this process when you set up a new device, or replace the device at an existing register.
Registers, outlets, and devices
Each register is a Register record (s_c__Register__c) in Salesforce, with four fields.
| Field | What it does |
|---|---|
| Name | The name staff select on the device when they connect it. |
| Outlet | The outlet the register belongs to. Every register belongs to exactly one outlet, and an outlet can have as many registers as you have trading positions. |
| Active | Only active registers can be connected. Clear it to retire a register without deleting it. |
| Connected | The POS selects this when a device connects and clears it when the device disconnects. |
Keep these points in mind when you plan your devices:
- One device per register. A connected register is hidden from the list on every other device. To move a register to a new device, disconnect it from the old device first.
- The register code belongs to the outlet. Every register in an outlet shares the outlet’s Register Code, and the code you enter at sign-in decides which outlet’s registers are listed.
- History stays with the register. Each shift, and the orders taken in it, is linked to the Register record, so when you replace a device the history stays with the register.
- Printer setup stays on the device. Printer settings are saved in the browser on the device, not on the Register record. When you replace a device, connect the printers to the new one.
To create a register, see add a register to an outlet.
Before you start
- The outlet has at least one register with Active selected and Connected cleared. See add a register to an outlet.
- Your store has a POS URL, such as
shop.example.com/pos. See configure your POS access URL. - You have the outlet’s register code, from the Register Code field on the Outlet record. See create a store outlet.
- You are a POS user at the outlet, with an active Outlet User record and a PIN on your Salesforce user. See add a POS user and set user PINs.
- The device and browser are supported. See compatible hardware for POS.
Connect a device to a register
- On the device, open a browser and go to your store’s POS URL.
- Enter your sign-in details:
- Username: your Salesforce username, for example
jo.smith@example.com. - Register code: the outlet’s register code, for example
mybusiness-location-672. The match is exact, including case and hyphens. - Pin code: your POS PIN.
- Username: your Salesforce username, for example
- Select Log in. The Which register is this? screen lists the outlet’s registers that are active and not connected to another device.
-
Select the register for this device.

- Select Confirm connection.
The Select a user to start shift screen opens, and Connected is now selected on the Register record in Salesforce. The device stays connected to this register until someone disconnects it, so staff go straight to starting a shift from now on.
If no register is available
The Which register is this? screen lists only the registers you can connect. A register doesn’t appear if it’s connected to another device or isn’t Active in Salesforce. If no register at the outlet can be connected, POS shows No registers are available instead.
From either screen, choose one of these:
- Use a register at this outlet. Disconnect the register from the device using it, or select Active on the register in Salesforce. The No registers are available screen refreshes every few seconds, or select Check again to refresh it now.
- Leave this outlet, for example to sign in to a different one. Select Log out in the top bar.
When you log out, POS clears the outlet data and saved sign-in details from this device and shows the sign-in screen. Logging out doesn’t disconnect any registers, so devices already using them keep working.
Troubleshooting
These are the problems most often seen when connecting a register:
- A red banner with
POS01001,POS01002, orPOS02001. The username, PIN, or register code did not match. See troubleshoot POS sign-in errors. - The register you want is not in the list. It is inactive, connected to another device, or belongs to a different outlet. Check the Active, Connected, and Outlet fields on the Register record. If the device it was on is lost or broken, disconnect it in Salesforce.
Was this article helpful?
Thanks for your feedback! It helps us improve our docs.